Deburring
Deslagging
Edge rounding
Finishing
Grinding
Line grain
Oxide layer
RoughnessCustomer story
Van Bussel, AstenHow stainless steel specialists van Bussel can shorten their lead time with Q-Fin’s machines.
F800
Extremely fast deburring, edge rounding and finishing with this machine suitable for sheet metal parts up to 800 mm wide.
With this F800 you can execute various finish applications including deburring, grinding, edge breaking, edge rounding, removing the oxide layer or heavy slag and line finishing. A combination of these operations is also possible. The machine is suitable for processing flat sheet metal up to 800 mm wide.
More information
I would like to receive the detailed technical specifications of this machine.
"*" indicates required fields
Q-FIN Quality Finishing Machines
Wilgenakker 8
5571 SJ Bergeijk
The Netherlands
t. +31 (0)497 58 10 18
[email protected]
- Combination of operations possible in one pass
- Easy-to-use HMI screen with adjustable programs
- Vacuum or magnet support for non-ferrous or ferrous metals
- Optional automatic height setting on both grinding and brush units
- 5 times faster than comparable machines
Get your
competitive
edge
With the F800 from Q-Fin, you can deburr, round off and/or finish sheet materials in one single pass. Depending on the materials to be finished you select a vacuum or magnetic system. The conveyor belt is adjusted according to your choice of system.
The first station of the F800 consist of a grinding unit. The abrasive belt of this unit removes the burrs and/or incinerations marks from the product surface. If you do not have any burrs you can leave the abrasive belt switched off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and third station consist of the brush unit, equipped with 4 cross-rotating oscillating brushes. These allows you to remove the sharp edges of the product by breaking the edges or providing them with a (large) radius. By placing special brushes, the F800 with magnetic system also allows you to perfectly remove oxide skin or slag from steel sheet parts.
| F800 | ||
| Conveyor belt speed | 0.3 - 8 m/min | |
| Product fixation | Vacuum or magnet support | |
| 7.5 kW grinding unit with frequency control | 1 | |
| 2.2 kW disc brush motor with frequency control | 4 | |
| Minimum workpiece dimension | 80 x 80 mm | |
| Maximum workpiece width | 800 mm | |
| Maximum workpiece height | 150 mm | |
| Machine power supply | 400 V, 50 Hz, 32 A, 16 kW | |
| Dimensions (L x W x H) | 2150 x 1805 x 2320 mm | |
| Weight | 2960 kg |
Test this machine in our showroom
Are you interested in one of our machines but would like to see it in action first? Schedule an obligation-free demonstration at our showroom location. Alternatively, you can also send us your own products for a remote demonstration. Contact us for more information, and we will get in touch with you regarding dates and possibilities.
Find out what suits this machine
Robot Cell
Robot Cell for the automatic loading and/or unloading of sheet metal parts in combination with a F1200 or SER1200.
Turnaround station
Reversing station for 2-sided finishing of sheet metal parts up to resp. 800, 1200 and 1500 mm wide.
Wet Extraction System
Fire hazard is excluded with our wet operating extractor system. Extracts grinding dust without loss of pressure.
