F1200

The deburring machine for finishing sheet metal parts up to 1200 mm wide. 5 times faster and with a finishing of your choice.

bullet bullet bullet

Excellent finishing machine

From the vision of "small for small and big for big", this wide version of the Q-Fin deburring machine has been developed. With the Q-Fin F1200 it is possible to deburr, deburr, grind, edge break, round, remove slag, remove oxide skin or apply a line finish on sheet metal parts up to 1200 mm wide. A combination of these operations is also possible.

The throughput of the F1200 is 5 times higher than comparable machines.

De Cromvoirtse chooses Q-Fin

“This machine was not only purchased to round off the contours, but especially to remove the oxide layer from the cut edges of thick material. Precisely because of this we have chosen this Q-Fin machine. It gave the best results when removing the oxide layer. The finishing machine is equipped with a return belt, so the parts can be processed on both sides without manual intervention.”

– Bart van Gisbergen
Head of sales at De Cromvoirtse

Specs

- Conveyor belt speed adjustable: 0.3 - 8 m1/min
- With vacuum or magnetic support
- 4 pcs. 2,2 kW brush motors with frequency control
- Min. workpiece dimensions: 50x50 mm (MAG) / 80x80 mm (VAC)
- Maximum workpiece width: 1200 mm
- Maximum workpiece height: 170 mm
- Machine power supply: 400 V, 50 Hz, 32 A, 16 kW
- Dimensions: 2040 x 2180 x 2090 mm (L x W x H)

2.650 KG
Download brochure Download technical specs

Ready to work finer and faster too?

Contact us for more information or a demo.