DS1200

To remove slag from your steel parts up to 1200 mm wide quickly and efficiently without any effort.

Heavy slag removal with hammer and chisel is time-consuming and physically demanding work for which Q-Fin has an automatic solution! Q-Fin introduces the DS1200, a compact, stand-alone machines which easily remove slag from cutting parts up to 1200 mm wide in no time and prevent debris flying around in the deburring machine.

More information

I would like to receive the detailed technical specifications of this machine.

"*" indicates required fields

Hidden
Q-Fin

Q-FIN Quality Finishing Machines
Wilgenakker 8
5571 SJ Bergeijk
The Netherlands
t. +31 497 58 10 18
info@qfin-deburring.com

  • Easy to integrate in production line
  • Powerful magnetic product fixation
  • Two deslagging rollers
  • Prevents pollution and damage in deburring machine
  • No flying debris

Get your
competitive
edge

DS1200

Deslagging is a labour-intensive, dirty job which still often involves the use of a hammer and chisel. Or an electrically powered hand-held machine is used. Because of the heavy workload for both the operator and the hand machine, these hand machines have to be replaced regularly. This causes high costs, an extra waste flow and possible health problems (e.g. HAVS) for the operator.

The DS1200 and DS600 have been specially developed by Q-Fin for the automatic removal of slag produced during plasma cutting or oxy-fuel cutting. This compact machine can be integrated in any production line. If a line setup is chosen, the slag is removed before the product enters the deburring machine, which takes care of the edge rounding of the cutting part. In this way, the machine contributes directly to optimising the production process and improving work safety. The residual material (dross) removed during the processing of the product remains on the conveyor belt in the deslagging machine and falls into the collection tray at the bottom of the machine. This molten metal can be disposed of as scrap in the appropriate container. If slag removal is integrated in a deburring machine, the machine will become seriously contaminated and there is a risk of damage from flying slag. By making the DS machine ‘stand-alone’, this is prevented. The
DS600 and DS1200 has easy operation and optimal ergonomics for the operator.

This unique “DESLAGGING” machine  removes (heavy) slag from sheet metal parts up to 1200 mm wide by means of two robust slag discharging contact rollers. Because the hammer rollers rotate against each other and the pins are spread out, the product surface is hit at every point twice per rotation. The slag removed is discharged and the now flat product can then be transported by a roller table or driven conveyor belt to the deburring machine where it will receive its final finish.

DS1200
Conveyor belt speed 0.3 - 5 m/min
Motor 0.75 kW motor with frequency control
Product fixation Magnet (for ferrous parts)
Minimum workpiece dimensions 65 x 65 x 5 mm
Maximum workpiece width 1200 mm
Maximum belt load 200 kg
Machine power supply 400 V, 16 A, 8 kW
Dimensions 2016 x 1750 x 2079 mm
Weight 1250 kg
Request technical specifications

Customer story

Van Bussel, Asten

How stainless steel specialists van Bussel can shorten their lead time with Q-Fin’s machines.

View all customer stories

Find out what suits this machine

Ready to
work faster?

Contact us for more
information or a demo

Make an appointment

Joost Kouwenbergh
Export Manager
+31 497581018 j.kouwenbergh@q-fin.nl