Machines

Pro Set

Deburring, grinding and edge rounding at high speed. With finish of choice and including wet operation extractor

Unique features
For plate parts with a width from 10 up to 200 mm
Deburring, grinding, bending, edge rounding
Unique vacuum system for very small products
5x faster than similar machines
You determine the finish and degree of edge rounding
Also suitable for very small workpieces
Easy to operate
Completely smooth edge rounding
Non-directional or line grain grinding
Freely adjustable speed of: convey belt, brush unit and grinding unit
Constant quality
Choice between vacuum (non-ferrous) or magnetic (ferrous) transport system
Standard equipped with 1 abrasive belt and 2 brushes
Unique brush height tracking system
Quick abrasive belt change system
Easy adjustable brushes for brush wear compensation
Plate thickness automatically adjustable with digital reading
Safe and convenient to use
Clear work process, everything is clearly visible
Little maintenance and easy and quick cleaning
Choice in setup of the 3 stations
Closed setup: safe and no dust in the area
Easy to move and to install
CE approved
Non-directional or in line grinding
Freely adjustable speed of: convey belt, brush unit and grinding unit
Constant finish quality
Choice between vacuum (non-ferrous) or magnetic (ferrous) transport system
Standard equipped with 1 grinding belt and 2 brushes
Unique brush height tracking system
Quick grinding belt change system
Easy adjustable brushes for brush wear compensation
Plate thickness automatically adjustable with digital reading
Safe and convenient to use
Clear work process, everything is clearly visible
Little maintenance and easy and quick cleaning
Choice in setup of the 3 stations
Closed setup: safe and no dust in the area
Easy to move and to install
CE approved

The F200 XL is specially designed to finish sheet metal parts from 10 mm up to 200 mm wide, and is equipped with a vacuum or magnet system. Minimum product dimensions magnet-version (suitable for steel and other ferrous parts): 10 x 10 mm. Minimum product dimensions for the vacuum-version (suitable for stainless steel, aluminium, steel and other non-ferrous parts): 20 x 20 mm.

With the WES3000 made by Q-Fin fire hazard is excluded. With this wet operating extraction system you can extract grinding dust without the loss of pressure. The extractor is entirely made of stainless steel and has an extraction capacity of 3000 m3/h. With the WES3000 you also avoid the risk of explosion when grinding aluminium parts.

The Pro Set can be shipped incl. piping. If required, we also take care of transport, installation and training on location.

Q-Fin Pro Set: A combination of the F200 XL and the WES3000. Deburring, grinding and finishing at high speed. With finish of choice and wet operating extraction system.

Explanation

Operation F200 XL

The first station of the F200 XL is one grinding head. The abrasive belt removes the burrs and/or laser burn from the product surface. You can change the grain size of the abrasive belt, depending on the height and hardness of the burr. Changing an abrasive belt will take less than one minute.

The second and third station are brush units. These brushes can break the sharp edges of the product and provide it with a rounding. The edges of (tiny) holes in the product will also be rounded. Furthermore, the brush gives a smooth finish to the surface. By applying a second brush, compared to the F200, the XL gives an even smoother finish to the surface.

Operation WES3000

WES is short for ‘Wet Extraction System’ and is the easiest, safest and most sustainable way to extract grinding dust according to Q-Fin. With the wet-operating dust extractor, fire and explosion hazards are excluded.
The WES3000 is a 3 kW extraction system with a wet filter, with a capacity of approx. 3000 m3/h. The extraction system is standard equipped with a electrical floating valve controlling the water volume and level.

Specs

F200 XL
• Conveyor belt frequency controlled 1,2 - 10 m1/min
• With vacuum or magnet support
• 2 pcs. 2.2 KW brush engines with frequency control
• Clear control panel
• Maximum workpiece width: 200 mm
• Maximum workpiece height: 100 mm
• Connection value machine: 400 V, 50 Hz, 16 A, 8 kW
• Measurements: 1850 (2185) x 670 x 2150 mm (L x W X H)

1.090 KG

WES3000
• Ventilator 3 kW
• Capacity: 3000 m3/h (max. 4000 m3/h)
• Fully manufactured in stainless steel
• Automatic filling and levelling
• Comes with 5 dust collectors
• Control by power switch or external machine
• Connection value WES6000: 400 V, 50 Hz, 16 A, 4 kW
• Measurements: 1435 (1605) x 875 x 2030 (2400) mm

335 KG