Q2S

Reversing station for 2-sided finishing of sheet metal parts up to resp. 600, 1200 and 1500 mm wide.

bullet bullet bullet

Turnaround unit

It’s often heavy and / or large steel plate parts that must be provided with a large edge rounding on both sides for a good adhesion of powder coating. These parts must be passed through the machine twice and turned over in between. The latter is often done by hand or with the help of an overhead crane. This takes up a lot of time, it is strenuous work for the operators and not one hundred percent safe. Because according to Q-Fin's GrindingPower philosophy, the products can only be provided with a large radius at high speed giving pressure on one side, Q-Fin has developed the reversing station Q2S in 600, 1200 and 1500 mm wide.

Incorporated in the deburring line, the Q2S turnaround station provides batch-wise double-sided finishing at an unprecedented high throughput speed. The system can be operated and maintained by 1 operator.

Geschikt voor

Willems Baling Equipment chooses Q-Fin

“Wij hebben alleen de beste productiemachines nodig om onze eigen kwaliteit te kunnen waarborgen. De Q-Fin ontbramingsstraat is geschikt voor grote platen welke moeilijk met de hand te keren zijn omdat hij deze automatisch keert. Dat levert ons een hele hoop tijdwinst op.”

– Bram Willems
Chief Operating Officer bij Willems Baling Equipment

Specs

• Available as Q2S600 - Q2S1200 - Q2S1500
• Maximum conveyor belt load: 550 kg
• Minimum product thickness: 1.5 mm
• Maximum product thickness: 50 mm
• Minimum product size: 280 x 280 mm
• Voltage: 3x400V + N + PE / 50 Hz

Download brochure

Aanbevolen combinaties

Ready to work nicer and faster?

Feel free to contact us for more information or a demo.