Q-Edge
By providing sheet metal workpieces with a perfect rounding, the adhesion of the coating is much larger, and corrosion is prevented. It is also important that the Q-Edge edge rounding standard prevents employees from injuring themselves on sharp edges.
The larger the Q-Edge radius, the higher the corrosion resistance and the smaller the chance of injuries.
If sharp corners are not sufficiently deburred and rounded, there will be hardly any coating on these sharp edges. This makes the chance of the formation of corrosion very high.
The advantages of mechanical deburring and the application of the Q-Edge radius:
- All workpieces of a project are properly and evenly deburred and rounded.
- Manual deburring leads to workpieces that are not all evenly and properly deburred and given a proper edge rounding.
Besides, it is almost impossible to manually deburr and round al workpieces evenly. Therefore, it may be that the workpieces differ from one another in terms of edge breaking or edge rounding, and do not all meet our standard.
With one working process by the deburring machine, all sides of the workpiece are deburred and rounded in accordance with our standard. The edges are provided with a small, smooth and mainly consistent radius. The unique quality of the deburring machines of Q-Fin is that all holes and openings, both big and small, are both deburred and rounded.
Q-Fin sets the standard for the edge rounding and deburring of workpieces in different radii with its deburring machines, with the Q-Edge standard. You determine the radius!
