Pro Set
The professional choice for the deburring, grinding and edge rounding of small parts at high speed. Including a wet operating, all stainless steel extractor.
The professional choice for the deburring, grinding and edge rounding of small parts at high speed. Including a wet operating, all stainless steel extractor.
The Q-Fin Pro Set is a combination of the F200 XL deburring and grinding machine and the WES3000 wet operating extraction system.
The professional set for finishing sheet metal products up to 200 mm wide at high speed. With vacuum or magnet support system.
The F200 XL is specially designed to finish sheet metal parts from 10 mm up to 200 mm wide, and is equipped with a vacuum or magnet system. Minimum product dimensions magnet-version (suitable for steel and other ferrous parts): 10 x 10 mm. Minimum product dimensions for the vacuum-version (suitable for stainless steel, aluminium, steel and other non-ferrous parts): 20 x 20 mm.
With the WES3000 made by Q-Fin fire hazard is excluded. With this wet operating extraction system you can extract grinding dust without the loss of pressure. The extractor is entirely made of stainless steel and has an extraction capacity of 3000 m3/h. With the WES3000 you also avoid the risk of explosion when grinding aluminium parts.
The Pro Set can be shipped incl. piping. If required, we also take care of transport, installation and training on location.
Q-Fin Pro Set: A combination of the F200 XL and the WES3000. Deburring, grinding and finishing at high speed. With finish of choice and wet operating extraction system.
The F200 XL is a 3 stations deburring and finishing machine that is standard equipped with the brush-height tracking system developed by Q-Fin. Combined with the simple button control this ensures that the configuration and operation of the F200 XL is self-explanatory, resulting in the most user-friendly machine available on the market.
The machine is standard equipped with a free adjustable speed for the conveyor belt, grinding belt and/or brush units, which makes it possible to perform multiple finishing operations and to realise all imaginable results. You decide on the desired finish or amount of edge rounding yourself.
'WES' is short for ‘Wet Extraction System’ and is the easiest, safest and most sustainable way to extract grinding dust according to Q-Fin. With
this wet operating dust extractor, fire and explosion hazards are prevented and you are always working safe.
In many cases multiple deburring machines can be connected to 1 WES. The WES3000 has a suction capacity of 3000 m3/h and that is more than sufficient for extracting the dust of the F200 XL. You can even connect two F200 XL's to the WES3000. We can arrange the installation including pipe work and do the training of your operators on location.
F200 XL
• Conveyor belt frequency controlled 0,3 – 5 m1/min
• With vacuum or magnet support
• 2 pieces of 2.2 kW brush engines frequency controlled
• Minimum workpiece size: 10x10 mm (MAG) / 20x20 mm (VAC)
• Maximum workpiece width: 200 mm
• Maximum workpiece height: 100 mm
• Connection value machine: 400 V, 50 Hz, 16 A, 8 kW
• Dimensions: 1850 x 670 x 2145 mm (L x W x H)
WES3000
• Ventilator 3 kW
• Capacity: 3000 m3/h (max. 4000 m3/h)
• Fully manufactured in stainless steel
• Automatic filling and levelling
• Comes with 5 dust collectors
• Control by power switch or external machine
• Connection value machine: 400 V, 50 Hz, 8 A, 4 kW
• Dimensions: 1645 x 1090 x 2300 mm (L x W x H)