Ultimate Set 1500

Ultimate Set 1500

The Q-Fin Ultimate Set is a combination of the F1500 deburring and grinding machine (for parts up to 1500 mm wide), the F200 XL (for parts between 10 and 200 mm wide) and the WES6000 wet operating extraction system. The ultimate solution for finishing metal parts.

The F1500 is suitable for finishing sheet metal parts from 80 up to 1500 mm wide. Equipped with a vacuum or magnet system. Minimum product dimensions 80 x 80 mm (for the vacuum version). The magnet version is only suitable for finishing steel and other ferrous parts. The vacuum version is suitable for the finishing of stainless steel, aluminium, steel and other non-ferrous parts.

The F200 XL is specially designed to finish sheet metal parts from 10 mm up to 200 mm wide, equipped with a vacuum or magnet system. Minimum product-measurements magnet-version (suitable for steel and other ferrous parts): 10 x 10 mm. Minimum product-measurements for the vacuum-version (suitable for stainless steel, aluminium, steel and other non-ferrous parts): 20 x 20 mm.

Both deburring machines can be combined with one extraction system. With the WES6000 from Q-Fin fire risk is excluded. With this wet-working extraction system you can extract grinding dust without the loss of pressure. The extractor is entirely made of stainless steel and has an extraction capacity of 6000 m3/h. With the WES6000 you also avoid the risk of explosion when grinding aluminium parts.